Products

Flight Case for Akai APC40LT MK2 Ableton Performance Controller W-Sliding Laptop Shelf

The ProX X-APC40LT MK2 Flight case is made specifically for the Akai APC40 MKII Ableton Performance Controller. This Akai APC40 MKII  Flight case is made with the highest quality material and workmanship to give you the ultimate security for any sized controller. If you have a passion for your gear and want to keep it safe at all times, this case will perform at the highest level every time.
 

40" Utility Case W-Low Profile Wheels 11" x 14" x 41" 3 Cu.Ft.

The ProX XS-UTL12W Trunk, Utility,  hardware or Lighting case functions great is a dependable, durable ATA-300 style flight case with a heavy duty design that is sure to stand up to the rigors of travel and the wear and tear of being on the road all while keeping your gear secure and safe.

Flight Case for Rane Seventy-Two 72 and Rane Seventy DJ Mixer

ProX XS-RANE72 Road Case is designed by ProX Cases for the Rane Seventy-Two (72) and is made with the highest quality material and workmanship to give you the ultimate security for your equipment. If you have a passion for your gear and want to keep it safe at all times, this case will always perform at the highest level.  The XS-RANE72 is constructed with our rugged signature 3/8" Gig-Ready Series Plywood, reinforced steel ball corners, and recessed steel padded handles and latches. There is additional space for cables and small accessories in the back and underneath the unit for convenience, as well as a removable front panel for you to easily access the front controls and headphone/mic jacks.

White 3.28Ft 1M Lycra Cover Scrim Sleeve fits 12In. Quad Box Truss Segment

The ProX SQ328TS-W 3.28 Ft. 1M WHITE Truss Lycra Cover Sleeve Cover is designed to fit any 12" box truss no matter the manufacturer. This white ProX Truss Cover Sleeve gives your truss setup a smooth, finished appearance. Depending on your occasion you can add lighting inside or out to instantly create stunning effects. The stretchable Lycra fabric consists of 90% Polyester & 10% Spandex. Allowing it to conform to all your edges fitting like a glove on your 3.28 Ft. truss, while giving your scene a sleek and uniform look. 

3 Ft. Outrigger Brace for Ground Support Truss Tower

The ProX Truss XT-GSOUTS3 is a 36" Outrigger with Adjustable Foot and Aluminum Assist Brace Tube

Outrigger Base strut that attaches to both the base and the Tower Truss, establishing a firm, steady installaltion.

3.28 Ft. - 1 Meter Circle Truss - Base Plate or Top Mount

The ProX XT-BPCS328 3.28ft Circle Truss is excellent for a variety of lighting and accessory needs of a mobile DJ, stage set, sound arrangements and more!  This could also be used as base or truss topper.  Create unique lighting designs by mounting this circle on the top of a truss segment or totem and hanging lights in a 360-degree dispersion. 

Heavy Duty 2 Leg Clamp for StageQ Staging

The ProX XSQ-MX2 StageQ Heavy Duty STAGE 2 LEG CLAMP  This is the clamp for the StageQ Heavy Duty Platform Series Stage. Built with industry-leading materials and precision production processes. The clamps are made of high-quality steel.   Us of these clamps where only 2 legs meet increases the stability of the staging system.  

Adjustable Telescoping StageQ Leg for XSQ Staging 16 Inch to 24 Inch | 2 Inch Tubing

The ProX XSQ-16-24 is a (4) Pack of Adjustable Telescoping Stage Leg for or XSQ Staging 16 In. to 24 In.  Manufactured with 2" Tubing to fit in the StageQ™ platform pockets.

Padded Gig Bag Fits 2 16x16 Truss Base Plates

The ProX XB-BP16TB is a durable and strong carry bag for two (2) 16" baseplates.  The front zippered pouch is designed for small parts and accessories.   The bag is made from ballistic nylon and is double sewn for strength and durability and the handle makes for easy carrying.

ZeroG Large DJ Controller EVA Ultra-Lightweight Molded Hard-Shell Case

The ProX XB-DJCL ZeroG™ is specifically made for Large Sized Controllers.   This ProX  Ultra Lightweight Hard-Shell Case/Bag with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper is the perfect compliment to your gear when you want a strong, good looking ultra-lightweight case for your equipment.  The ZeroG™ series is a great product falling between a traditional hard ATA style case and a soft padded bag.  

ZeroG Large DJ Controller EVA Ultra-Lightweight Molded Hard-Shell Case

The ProX XB-DJCL ZeroG™ is specifically made for Large Sized Controllers.   This ProX  Ultra Lightweight Hard-Shell Case/Bag with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper is the perfect compliment to your gear when you want a strong, good looking ultra-lightweight case for your equipment.  The ZeroG™ series is a great product falling between a traditional hard ATA style case and a soft padded bag.  

ZeroG Medium DJ Controller EVA Ultra-Lightweight Molded Hard-Shell Case

The ProX XB-DJCM ZeroG™ is specifically made for Medium Sized Controllers.   This ProX  Ultra Lightweight Hard-Shell Bag with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper is the perfect compliment to your gear when you want a strong, good looking ultra-lightweight case for your equipment.  The ZeroG™ series is a great product falling between a traditional hard ATA style case and a soft padded bag.  

ZeroG Small DJ Controller EVA Ultra-Lightweight Molded Hard-Shell Case

The ProX XB-DJCS ZeroG™ is specifically made for Small Sized Controllers.   This ProX  Ultra Lightweight Hard-Shell Case/Bag with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper is the perfect compliment to your gear when you want a strong, good looking ultra-lightweight case for your equipment.  The ZeroG™ series is a great product falling between a traditional hard ATA style case and a soft padded bag.  

White 3.28Ft 1M Lycra Cover Scrim Sleeve fits 12In. Quad Box Truss Segment

The ProX SQ328TS-W 3.28 Ft. 1M WHITE Truss Lycra Cover Sleeve Cover is designed to fit any 12" box truss no matter the manufacturer. This white ProX Truss Cover Sleeve gives your truss setup a smooth, finished appearance. Depending on your occasion you can add lighting inside or out to instantly create stunning effects. The stretchable Lycra fabric consists of 90% Polyester & 10% Spandex. Allowing it to conform to all your edges fitting like a glove on your 3.28 Ft. truss, while giving your scene a sleek and uniform look. 

Xstatic RGB 48" LED Strip Kit W/Remote Control & Power Supply

The Xstatic Pro Lighting X-S72RGBKIT is an IP65 rated, 48 inch, 12V RGB LED kit that includes a power supply, IR control box and remote. The X-S72RGBKIT features 5050 SMD LEDs and is the perfect choice for all ranges of decor lighting.

Pangolin QuickShow Control Software with ILDA Interface

QuickShow includes ILDA USB Interface and USB Cable.