Products

Adjustable Book-Hinge Connection 0° to 180° for F34 Conical Truss

The ProX XT-BOOKHINGE Adjustable Book-Hinge Truss Connection  from the most trusted staging support systems in the industry, and is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution perfect formobile DJs, bands, outdoor performances, nightclubs, live mobile productions, or permanent installations.   It adjusts from 0° to 180° and fits ProX 12" SQ F34 Conical trussing.  Manufactured from high-grade and lightweight aluminum which is easy for transportation and setup!

Set of Three 57 inch 5ft Universal Lighting Stand Triangle Truss Sections 5FT 10FT 15FT

The ProX T-LS35C-TRUSS is a set of three, 57" Triangle Truss (Bolt-on). Thse medium-duty triangle truss sections create a near 15 ft section span.  You can mount up to 200 lbs evenly distributed across the max lenth.  Truss tubes are 35mm - 1-3/8" in diameter.  Truss sections are 6-inches in overall width.  You can create a 57" near (5Ft) span all the way up to a 171"  14.25 ft span; depending on your specific needs. *Stands and Crank System - Not Included*

12" Aluminum Slotted Top Plate and Speaker Stud For F34 Truss Base | 6mm

The ProX XT-BP12A F34 12" X 12" Aluminum Top Plate for Totems W/Twist Locks is the perfect addition to your show totems and for truss construction when you need to mount lights or other equipment at the top or end of a run of a truss.  The ProX XT-BP12A is an Exclusive Product from ProX (Design Copyright © 2018) and will make your setup and teardowns much easier and safer. 

The plate comes with slots near the edges and a center hole and an offset hole for mounting to fit virtually any light/speaker or device that you want to mount, it also has a handy finger hold for easy carrying.   It comes with all the necessary hardware to mount to the trussing.  Speaker Spud not included, available separately as XT-SPST   

StageQ™ 6-Stage Package | 12Ft X 16Ft Total Stage Area | Adjustable 28 Inch to 48 Inch Height

The ProX XSQ-12x16 PKG-48 contains all the necessary parts you need to create a 12-foot by 16-foot stage system that is adjustable from 28 Inch to 48 Inch Height.   It does NOT include steps or guardrails that are available separately at additional cost.  

StageX™ 8 Inch Black Portable Stage Stage Skirt

The ProX XSF-Skirt16 Stage Skirt measure 8" in height and 8 ft. in length and is the perfect piece to give your StageX™ portable staging a complete and professional look.

StageX™ 24 Inch Black Portable Stage Stage Skirt

The ProX XSF-Skirt24 Stage Skirt measure 24" in height and 8 ft. in length and is the perfect piece to give your StageX™ portable staging a complete and professional look.

3 Ft. Unbalanced TRS-M Stereo to Dual TS-M High Performance Audio Y Cable

The ProX XC-SYP03 is ideal for professional touring and live sound applications where a device with a Dual TS-M output/input needs to be connected to a device with a 1/4" TRS-M output/input.  ProX cables are built with uncompromised quality with excellent performance at each connection - Instrument cables, Speaker cables, RCA cables, DMX cables, Power cables and more. Our cables are made for professionals, by professionals

MANO™ Mobile DJ Bag for Pioneer DDJ-1000 SRT and similar sized DJ Controllers.

ProX XB-MDDJ1K Mano™ Series Mobile DJ bags are great when you need an ultra lightweight travel hand bag. Mano Series Mobile DJ bags are great when you need an ultra lightweight travel hand bag. It stores most brand DJ Controllers ranging in size including Pioneer® DDJ-REV7 DDJ-1000 SRT, and DDJ-FLX6 MANO™ Series DJ bags are comprised of lightweight materials. It’s made with plush soft interior that keep your favorite gear firmly protected inside of each bag.

ZeroG EVA Ultra-Lightweight Small Bag Molded Hard-Shell Case for DDJ-SB3 / RB / RR / SR2 and Similar Sized DJ Controllers

The ProX XB-DJCM ZeroG™ is specifically made for Pioneer® DDJ-SB3 / RB / RR / SR2 and Similar Sized Medium Sized Controllers.   This ProX  Ultra Lightweight Hard-Shell Bag with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper is the perfect compliment to your gear when you want a strong, good looking ultra-lightweight case for your equipment.  The ZeroG™ series is a great product falling between a traditional hard ATA style case and a soft padded bag.  

Universal Speaker Stand Carrying Bag

The T-SS26P-BAG speaker stand bag from ProX is a tough built bag with plenty of space to store and protect up to two speaker stands, three to four mic stands or other types of hardware. It's a great carrying bag to support DJ's, Musicians, and Tradeshow Exhbitors.  

Tough Build
The 46" nylon bag holds up to 45" stands which prevent the hardware from scratches and scuffing. The all metal zippers easy access to the interior of the bag. The soft handles with padded grip allow comfortable carrying for prolonged time. Inside of the bag there is a nylon divider which seperates your stands from rubbing and bumping against each other.

Sleek and Modern
The bag has two black metal zippers with ProX's signature red color zipper track aligned down the bag. Which makes it easier to find in dimly lit rooms or places with limited outdoor lighting. the ProX Logo is silk screened on to the center of the bag for easy identification.

Quick Transport 
No more storing stands in places stacked on top of each other, these lightweight bags make it easy for you to just grab one or more in each hand at a time while remaining fully protected. 

Bag Dimensions: 46" x 5" x 5"

GloPro 4 Panel LED Facade Package W-Flight Case - DISCONTINUED - SEPTEMBER 2022

The ProX XF-GLOPRO 4XFC GloPro™ DJ LED 4 Panel Facade Package is the perfect internally lighted DJ booth for a mobile DJ, nightclub or venue looking to create a lasting impression.   This unit is an extraordinary visual presentation and provides an outstanding and party stimulating display of light and movement. Enhance your performance and special event setup. 

Replacement Scrim Set White – For 6 FT Table Top Facade Incl. 2 Front Panels and 2 Side Panels

The ProX XF-STTFW White Replacement Scrim Set for the XF-TTFW  and XF-TTFB Tabletop Facades is a great way to keep your tabletop facade looking new.  The stretch fabric panels are easily removable for cleaning.   Facade Frame NOT Included!