Products

Flip-Ready Easy Retracting Hydraulic Lift Case for Yamaha PM7-10 Rivage Console by ZCase®

(Custom Order) The ProX XZF-YPM7/10 RIVAGE D3x2U  Flip-Ready™ case is Made in  Poland, exclusively for ProX by ZCase®, to fit the Yamaha YPM 7 and YPM 10 Rivage Consoles. These cases for digital audio consoles are designed and built to make transport and setup quick and very easy.  No more lifting heavy consoles into place on a table or stand.  The patent-pending hydraulic lift system provides easy movement from a vertical transport position to the horizontal operational position with almost no physical effort.  A heavy plywood base between the case and the four heavy-duty locking casters protects the case and equipment during transport. 

50 Ft. DMX XLR5-M to XLR5-F High Performance Cable

The ProX XC-5PDMX50 cable is ideal for DMX connection applications where a device with a male DMX XLR-5 output/input needs to be connected to a device with a female DMX XLR-5 output/input. 22AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer.

Cat 5/6 RJ45 to 3 Pin Female DMX Connector/Adapter

This XC-RJ45XF3 is a RJ45 to 3PIN Female DMX connector.  The XLR to RJ45 adapter makes it possible to use any length and low cost CAT-5/6 ethernet cable as a DMX512 cable.  The electrical properties of CAT-5/6 wiring is essentially the same as the more expensive DMX512 cables.   XLRJ45 are adapters to convert a DMX512 XLR connector to a RJ45 connector. 

100 Ft. DMX XLR5-M to XLR5-F High Performance Cable

The ProX XC-5PDMX100 cable is ideal for DMX connection applications where a device with a male DMX XLR-5 output/input needs to be connected to a device with a female DMX XLR-5 output/input. 22AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer.

Speaker Stud for Top Truss Plates

Make sure that an adequate sized base plate is used to prevent tipping and dangerous conditions.  24" x 24" minimum recommended. 

2 FT I-Beam 12" Bolted Box Pro Truss Segment 3mm

ProX XT-BTD1202 2FT I-Beam 12" Bolted Box Pro Truss Segment 3mm I-Beam 12-inch Bolted Truss BoltX™ Professional Box Truss is designed and engineered for many applications like stage lighting, concerts, Ninja Obstacle Course type construction, and similar uses.  Setting ourselves apart from other box truss manufacturers BoltX™ has an innovative end plate designed and manufactured with heavy-duty aluminum material, welded on both sides, and our exclusive circular rings at each corner of the truss to reduce or eliminate damage to the main chord ends. 

18 Ft Lighting Heavy-Duty Crank Truss Stand 500 Lb. Capacity with Outriggers Center Load18'Includes T-Adapter Truss Mount

The ProX XT-CRANK18FT-500 Heavy Duty Crank Stands are an integral part of the Truss SQ System for temporarily mounting lights for small to medium-sized DJ lighting at any event. It has Integrated casters, independently adjustable leg braces, and nylon guided leg sliders, which can all be used in conjunction with another same-rated stand, & trusses and T-Adapters . Each is made with Heavy Duty All-metal components; Sturdy, steel/aluminum construction. Eliminate direct lifting and lowering of heavy loads with the ProX Truss Heavy Duty Crank Stand.

POLARIS Portable Speaker and Lighting Dual Stand Kit with Base Plate, Adjustable Pole, and Carry Bags - Black Finish

ProX X-POLARIS WH POLARIS™ Portable Speaker and Lighting Dual Stand Kit – For PA Speakers, Portable Projectors, LED Lighting Bars, Par Lights, and Mirror Balls. Setup is incredibly easy and it takes up a very small footprint in smalller storage spaces and vehicles.
   The steel pole shaft can be raised and lowered seemlessly from 55" up to 72" inches in height. It has industrial grade rubber feet that help prevent movment and helps when lifting/tilting from the ground for repositioning. Its constructed of mostly of Steel from top to bottom, collar and shaft (most brands use plastic). 

Includes:  
(2) Adjustable Height Pole Shafts
(2) Steel Base Plates
(1) Carrying Pole Carrying Bag