Products

Flight Case for Two RCF NX L24-A Column Array Speakers W/4 Inch Casters

The ProX X-RCF-NXL24A is designed specifically to house and protect (2) RCF NX L24-A Stage Monitor speakers.

Flip-Ready Easy Detachable with 2U under console Retracting Hydraulic Lift Case for Allen and Heath DLive S5000 Console by ZCase

FOR CUSTOM ORDER ONLY 

ProX XZF-AH-S5000 D Flip-Ready™  with Detachable Mechanism case for Allen and Heath DLive S5000 Console is Made in Poland exclusively for ProX by ZCase® These cases for digital audio consoles are designed and built to make transport and setup quick and very easy.  No more lifting heavy consoles into place on a table or stand. 

Universal Flight Case for Small to Medium Size DJ Controllers 20" W x 13" D and Sliding Laptop Shelf

The ProX XS-UXLT MK2 Universal Flight case is made specifically for SMALL to MEDIUM size Digital DJ Controllers.  The case comes with plenty of foam inserts to get that completely customized snug fit to protect your favorite DJ controller!  This XS-UXLT Flight case is made with the highest quality material and workmanship to give you the ultimate security for any sized controller. If you have a passion for your gear and want to keep it safe at all times, this case will perform at the highest level every time.

Side Entry Clamp W/Reversed Elbow & Half Coupler For 2" (50mm) Tube Trussing

ProX T-C15 Side Entry Clamp W/Reversed Elbow & Half Coupler For 2" (50mm) Tube Trussing This TUV approved accessory clamp with a half coupler from ProX Direct is designed to be used with 50mm (2") tubing.  Compatible with F31-F32-F33-F34-F44P Trussing. 

9.02 Ft 2.75 M F34 Square Truss Segment | 2 mm Wall

The ProX XT-SQ920 Truss is one of the most trusted staging support systems in the industry and is built to the highest standards of safety and performance. It's a rugged and durable trussing solution perfect for live outdoor productions, nightclubs, and permanent installation

StageQ Panel to Panel Bottom Deck Security Clamp

ProX XSQ-C11 MK2 StageQ™ Panel to panel stage bottom Clamp is used for securing ProX StageQ stage panels (2'x8', 4x4' and 4x8') . Two panel to panel stage bottom clamps are used on every 4'ft and 8'ft side where panels join. This heavy duty clamp has a big twist knob that makes it easier to tighten with your hands and fits the pattern of a truss tool socket.

StageQ MK2 2ft x 8ft Heavy Duty Platform | With 28 to 48 Inch Height Legs

The ProX XSQ-2X8 MK2 Heavy Duty Platform Series is a convenient transportable staging solution that built tough and designed for maximum durability and safety. Engineered to minimize your set up time and effort with industry-leading design, materials, and precision production process.  The XSQ-2X8 MK2 Platform is a single side, indoor and outdoor, weather-resistant, portable staging platform. The ProX XSQ-2X8 MK2 works with StageQ  MK2 supports from ProX which are equipped with ball and socket adjustable leg base feet. 

Cat 5/6 RJ45 to 3 Pin Male DMX Connector/Adapter

This ProX XC-RJ45XM3 is a RJ45 to 3PIN Male DMX connector.  The XLR to RJ45 adapter makes it possible to use any length and low cost CAT-5/6 ethernet cable as a DMX512 cable.  The electrical properties of CAT-5/6 wiring is essentially the same as the more expensive DMX512 cables.   XLR to RJ45 are adapters to convert a DMX512 XLR connector to a RJ45 connector for using Cat 5/6 cables as DMX.   NOT FOR AUDIO!

Professional Waterproof SAC3MPX Power Twist TR1 Connector MALE Socket BY SEETRONIC

ProX XC-SAC3MPX Professional Waterproof SAC3MPX Power Twist TR1 Connector MALE Socket BY SEETRONIC. Socket achieves IP65 protection when used in combination with matching counterpart. Includes Matching Seal with Protective Cap.

Padded Gig Bag Fits 1x 12x12 inch Truss Base Plate

The ProX XB-BP12TB is a durable and strong carry bag for one (1) 12x12 baseplate.  The front zippered pouch is designed for small parts and accessories.   The bag is made from ballistic nylon and is double sewn for strength and durability and the handle makes for easy carrying.

Padded Gig Bag Fits 2 36x36 Truss Base Plates

The ProX XB-BP36TB is a durable and strong carry bag for two (2) 36" baseplates.  The front zippered pouch is designed for small parts and accessories.   The bag is made from ballistic nylon and is double sewn for strength and durability and the handle makes for easy carrying.

MANO™ Mobile DJ Bag for Pioneer DDJ-1000 SRT and similar sized DJ Controllers.

ProX XB-MDDJ1K Mano™ Series Mobile DJ bags are great when you need an ultra lightweight travel hand bag. Mano Series Mobile DJ bags are great when you need an ultra lightweight travel hand bag. It stores most brand DJ Controllers ranging in size including Pioneer® DDJ-REV7 DDJ-1000 SRT, and DDJ-FLX6 MANO™ Series DJ bags are comprised of lightweight materials. It’s made with plush soft interior that keep your favorite gear firmly protected inside of each bag.

5 Panel Black Frame DJ Facade W-Stainless Quick Release 180 Deg. Hinges

The ProX XF-5X3048B DJ Facade adds value and class to any DJ, musician or stage setup. Made with lightweight, powder-coated aluminum, the ProX Direct DJ Facade comes with both White and Black scrims.  Use the black scrims for a clean professional look or use the white scrims and add your own backlighting to create a fresh vibrant display.

RED Foldable Portable Laptop Stand With Adjustable Shelf

The ProX T-LPS600R Collapsible and Portable Laptop stand, Includes Shelf and Carry Bag is an essential tool for the traveling DJ or Musician. Most DJ booths and performance venues were not designed to accommodate a laptop, which creates a hassle for the DJ in many places.

Truss Modular 3X Rapid U Grid Trio Package for Lighting - Moving Heads W-Rolling Aluminum Baseplate

The ProX XT-GRU-PKGX3 makes building a modular lighting grid for moving heads or other entertainment lighting, that is expandable up to 10 U modules is easy to achieve with the XT-GRU-PKGX3.   The ProX grid package includes the beginning parts needed to mount move and store moving head fixtures for stages or performance areas.  The XT-GRU3024 grid units allow for grid configurations tailored to your needs.  You can hang up to10 grids beneath each other for custom layouts.