K-Truss™ F34 Economy 1.5mm

9.84Ft. 3M K-Truss F34 Economy Light-Structural Aluminum Truss | 1.5mm Wall

K-TRUSS™ - MOBILE DISPLAY SOLUTIONS:   ProX KT Series F34 Aluminum Truss | 1.5mm Wall is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution and is an Economy Light-Structural trussing system for light-duty use for trade show booths, DJ booths, DJ Totems, architectural non-loadbearing designs, and much more.  The ProX KT-F34SQ984  is particularly well suited for trade shows and light-duty construction of display systems, as well as event technology and as a support system for lighter lighting fixtures. Due to its design appearance combined with a lower cost, it provides the ability for reduced load capacity designs with a standard truss appearance. This system is ideally suited from a simple exhibition display up to a complex trade show booth.

12" X 12" F34 8mm Aluminum Top Plate W-Slots and Mounting Holes for Totems and Ends

The ProX XT-BP12A F34 12" X 12" Aluminum Top Plate for Totems W/Twist Locks is the perfect addition to your show totems and for truss construction when you need to mount lights or other equipment at the top or end of a run of a truss.  The ProX XT-BP12A is an Exclusive Product from ProX (Design Copyright © 2018) and will make your setup and teardowns much easier and safer. 

The plate comes with slots near the edges and a center hole and an offset hole for mounting to fit virtually any light/speaker or device that you want to mount, it also has a handy finger hold for easy carrying.   It comes with all the necessary hardware to mount to the trussing.  Speaker Spud not included, available separately as XT-SPST   

KTruss 4.92 Lightweight Square Truss Totem Package W-Truss Bag

The ProX KT-SQ492TOTEM KTruss 4.92 Lightweight Square Truss Totem Package W-Truss Bag is a package of the most popular products that are used for DJ Totems.  At the core is the ProX KT-F34SQ492  F34 Truss which is an Economy Light-Structural trussing system for light-duty use for trade show booths, DJ Booths & DJ Totems.  The truss section is accompanied by an XB-SQ492TB 4.92 Ft. Square Truss Bag, an XT-BP24A 24 In. x 24 In. 8mm Aluminum Base Plate, and an XT-BP12A 12" X 12" F34 8mm Aluminum Top Plate W/Slots and Mounting Holes.    You can use the totem exposed as "all-aluminum" or dress it up for a smooth, finished appearance with the included XTC-SQ492TS-W White Lycra-Spandex Cover.  

30" X 30" 8mm Aluminum Base Plate for F34 and F33 Trussing Fits Most Manufacturers W-Conical Connectors

This ProX XT-BP30A MK2 is a lighter weight alternative to our standard 10mm base plates and is made with 8mm AWT6 6082 Aluminum Plate for lighter weight.  It is great for putting moving heads, lights and more.  30" x 30" square aluminum base plate for standard-sized F34 square frame and F32 triangle truss.  The base plate is multiple drilled for offset mounting of F34 truss.  Excellent for goalpost truss layout or other installations that need an offset of the base plate. Protect your base plates with fabric carrying bags available separately. 

6.56Ft. 2M K-Truss F34 Economy Light-Structural Aluminum Truss | 1.5mm Wall

K-TRUSS™ - MOBILE DISPLAY SOLUTIONS:   ProX KT Series F34 Aluminum Truss | 1.5mm Wall is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution and is an Economy Light-Structural trussing system for light-duty use for trade show booths, DJ booths, DJ Totems, architectural non-loadbearing designs, and much more.  The ProX KT-F34SQ656  is particularly well suited for trade shows and light-duty construction of display systems, as well as event technology and as a support system for lighter lighting fixtures. Due to its design appearance combined with a lower cost, it provides the ability for reduced load capacity designs with a standard truss appearance. This system is ideally suited from a simple exhibition display up to a complex trade show booth.

8.20Ft. 2.5M K-Truss F34 Economy Light-Structural Aluminum Truss | 1.5mm Wall

K-TRUSS™ - MOBILE DISPLAY SOLUTIONS:   ProX KT Series F34 Aluminum Truss | 1.5mm Wall is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution and is an Economy Light-Structural trussing system for light-duty use for trade show booths, DJ booths, DJ Totems, architectural non-loadbearing designs, and much more.  The ProX KT-F34SQ820  is particularly well suited for trade shows and light-duty construction of display systems, as well as event technology and as a support system for lighter lighting fixtures. Due to its design appearance combined with a lower cost, it provides the ability for reduced load capacity designs with a standard truss appearance. This system is ideally suited from a simple exhibition display up to a complex trade show booth.

3.28Ft. 1M K-Truss F34 Economy Light-Structural Aluminum Truss | 1.5mm Wall

K-TRUSS™ - MOBILE DISPLAY SOLUTIONS:   ProX KT Series F34 Aluminum Truss | 1.5mm Wall is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution and is an Economy Light-Structural trussing system for light-duty use for trade show booths, DJ booths, DJ Totems, architectural non-loadbearing designs, and much more.  The ProX KT-F34SQ328  is particularly well suited for trade shows and light-duty construction of display systems, as well as event technology and as a support system for lighter lighting fixtures. Due to its design appearance combined with a lower cost, it provides the ability for reduced load capacity designs with a standard truss appearance. This system is ideally suited from a simple exhibition display up to a complex trade show booth.

4.92Ft. 1.5M K-Truss F34 Economy Light-Structural Aluminum Truss | 1.5mm Wall

K-TRUSS™ - MOBILE DISPLAY SOLUTIONS:   ProX KT Series F34 Aluminum Truss | 1.5mm Wall is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution and is an Economy Light-Structural trussing system for light-duty use for trade show booths, DJ booths, DJ Totems, architectural non-loadbearing designs, and much more.  The ProX KT-F34SQ492  is particularly well suited for trade shows and light-duty construction of display systems, as well as event technology and as a support system for lighter lighting fixtures. Due to its design appearance combined with a lower cost, it provides the ability for reduced load capacity designs with a standard truss appearance. This system is ideally suited from a simple exhibition display up to a complex trade show booth.

Top Truss Plate XT-BP12A W-Speaker Stud XT-SPST Package

The ProX XT-BP12ASPST F34 12" X 12" Aluminum Top Plate for Totems W/Twist Locks is the perfect addition to your show totems and for truss construction when you need to mount lights or other equipment at the top or end of a run of a truss.  The ProX XT-BP12A is an Exclusive Product from ProX (Design Copyright © 2018) and will make your setup and teardowns much easier and safer. 

The plate comes with slots near the edges and a center hole and an offset hole for mounting to fit virtually any speaker, light or device that you want to mount, it also has a handy finger hold for easy carrying.   It comes with all the necessary hardware to mount to the trussing.  Speaker Spud IS included, and also available separately as XT-SPST