Fenix Stand Mount for Hercules Line-Array Lift Systems - Black

The ProX/Fenix XT-AC582B is designed to mount medium to big line array systems on the Fenix Hercules series lift units.

Universal Mixer Case W/Pick Foam up to 14" x 17"

This ProX XS-UMIX1417 Professional quality ATA road case is a universal design for smaller mixers up to 14" x 17", and it does the job well.  It is filled with our pickable foam interior to allow you to custom fit this case to your mixer.

Battle Mode Case for Single Rane 12 & Rane 72 Mixer

The ProX XS-RANE7212 compact coffin case is the case you been waiting for. If you only use one turntable and a mixer and are looking to lighten your load. The XS-RANE7212 is the case for you.  Fits Rane 12 (battle mode)  and Rane 72 mixer. The case weighs 33 lbs. Made from ProX Signature series Plywood. Your gear is more than protected and still looks sleek with your setup. 

EVA Case for Medium DJ Controller

Lightweight construction with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper for securing your favorite gear. 

ProX has been manufacturing cases since 1984. Protecting you investment is always our goal.

EVA Case for Large DJ Controller

Lightweight construction with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper for securing your favorite gear. 

ProX has been manufacturing cases since 1984. Protecting you investment is always our goal.

EVA Case for Small DJ Controller

Lightweight construction with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper for securing your favorite gear. 

ProX has been manufacturing cases since 1984. Protecting you investment is always our goal.

1 Meter Top Truss Section for Electric Motor or Manual Chain Hoist

The ProX XT-TOPCM1M Top Section with 1M Top Length that fits F34 Series 12" and designed for Electric Motor or Manual Chain Hoist up to 4 ton.

F32 Roof Element W/Side Clamp 0.5 Meter

F32 Roof Element - F32 for Stage Roofs

9.84ft (3.00m) F32 I-Beam Segment Truss

ProX Truss has the most trusted staging support systems in the industry, and is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution perfect formobile DJs, bands, outdoor performances, nightclubs, live mobile productions, or permanent installations.

6.56ft (2.00m) F32 I-Beam Segment Truss

ProX Truss has the most trusted staging support systems in the industry, and is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution perfect formobile DJs, bands, outdoor performances, nightclubs, live mobile productions, or permanent installations.

4.92ft (1.50m) F32 I-Beam Segment Truss

ProX Truss has the most trusted staging support systems in the industry, and is built to the highest standards of safety and performance. It's a rugged yet lightweight trussing solution perfect formobile DJs, bands, outdoor performances, nightclubs, live mobile productions, or permanent installations.

Heavy Duty Tilting Mixing Console Stand W/Wheels

The Go-Anywhere, All-Purpose Stand for Sound and Lighting Consoles. Once you've used a ProX X-EZTILT you will never go back to dead lifting consoles!

40" Utility Case W/Low Profile Wheels - Honeycomb Black Laminate

Handy larger rolling utility case with low-profile wheels.

24" x 24" Folding Aluminum Base Plate W/Conical Connectors & Bag

Always use a large enough baseplate to support the load placed upon it.   Avoid tipping of your trussing which can be dangerous, damage your trussing and possibly void your warranty.

30"X30" Folding Aluminum Base Plate W/Conical Connectors & Bag

Always use a large enough baseplate to support the load placed upon it.   Avoid tipping of your trussing which can be dangerous, damage your trussing and possibly void your warranty.

300Ft Bulk Spool Balanced High Performance Microphone Audio Cable

ProX XC-MIC300 is a bulk pack of our high performance tour-grade audio cable, make your own custom cables. 20AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer.

15 Ft. Balanced 1/4" TRS to XLR-M

ProX XC-SXM15 is ideal for professional touring and live sound applications where a device with a XLR-F connection needs to be connected to a device with an TRS connection. 20AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer.

15ft 3Pin High Performance DMX Cable

ProX XC-DMX15 is ideal for professional lighting applications where a device with a male DMX output/input needs to be connected to a device with a female DMX output/input. 22AWG Oxygen-Free Copper (OFC) conductors for maximum signal transfer.

10FT 1/8" (3.5mm) TRS to XLR-M CABLE

The XCP-MXM10 is a Single 1/8" TRS Stereo to Single XLR-Male 10ft. Cable, made for perfect quality sound.  

5FT 1/8" (3.5mm) TRS to XLR-M CABLE

The XCP-MXM05 is a Single 1/8" TRS Stereo to Single XLR-Male 5ft. Cable, made for perfect quality sound.  

Road Case for Rane Twelve 12 Motorized DJ Control System

ProX XS-RANE12 Road Case is designed by ProX Cases for the RANE Twelve DJ Digital Control System and is made with the highest quality material and workmanship to give you the ultimate security for your controller. If you have a passion for your gear and want to keep it safe at all times, this case will always perform at the highest level.

Decorative Heart Trussing Unit (8 Segments)

Always know your load weight for your equipment: VERY IMPORTANT - CLICK HERE for Truss Loading Chart.

Adjustable Top Panel Point for Video Wall Truss Hanging Points

The ProX XT-TOPAPP Adjustable Panel Point for Video Walls allows you to create a stable hanging point on the upper chords of ProX XT Series (F34) truss to support video walls. 

Flight/Road Hard Case for One JBL VRX918S/SP

The ProX X-JBLVRX918SPX1W Flight/Road Case is a professional touring speaker case that houses One JBL-VRX918S/SP speaker.

Single 59"L x 2"D Truss Pipe W/Clamp & Hinge on Each End

This 59 inch (149.86 cm.) single pipe has a hinge joint and a 2" heavy duty clamp on each end.   Use for diagonal bracing, lighting and utility mounting, or just to create a decorative design.

RGB Accent 20" Led Light Strip - USB/Remote/Aluminum Body

Light up your control surfaces, stylize your music rigs or illuminate your home or office with this versitle lighting product.  It is packaged in a hanging retail display.

4U Deluxe Effects Rack 7" Deep Rail to Rail W/Handle

Whether you're on the road, in the air, or in the club, you know that your gear will be safe and secure. This is because each and every ProX case is ruggedly tested under the most stringent conditions to meet our state-of-the-art quality control standards. These professional-grade products also include external spring-loaded handles and butterfly twist latches. The rubber feet at the base will ensure maximum stability when stacking multiple units. As part of ProX Cases Premium Series line of products, the X-4U7D case is assembled with 3/8" plywood for premium protection. In addition to the heavy duty design and convenient features of the X-4U7D, this case features our exclusive Honeycomb Black finish giving you a stylish, durable, and dependable product that will last a lifetime.

Mirror Ball/Stands Package 2 X-MB20STAND & 2 MB-20 & T-SS28P

The ProX MB-20 is the ultimate start for your party! The 20 inch Mirror Ball is the perfect way to get your crowd moving, with its classic effects that work well with any lighting rig.  Our MB-20 mirror ball is made of 0.44" glass mirror tiles, which are smaller than those commonly used today. As a result, they offer an increased number of reflective tiles for a more dazzling and colorful effect.  You can achieve the classic disco effect through the use of a follow spot (sold separately). The ProX X-MB20STAND you can take your party to the next level with the 20" mountable mirror ball hook.  The mirror ball stand fits the MB-20 mirror ball and comes with its own built in motor that turns at 1 RPM.  The mirror ball hook  mounts on the T-SS28 Stands

Mirror Ball/Stands Package 2 X-MB16STAND & 2 MB-16 & T-SS28P

The ProX MB-16 is the ultimate start for your party! The 16 inch Mirror Ball is the perfect way to get your crowd moving, with its classic effects that work well with any lighting rig.  Our MB-16 mirror ball is made of 0.44" glass mirror tiles, which are smaller than those commonly used today. As a result, they offer an increased number of reflective tiles for a more dazzling and colorful effect.  You can achieve the classic disco effect through the use of a follow spot (sold separately). The ProX X-MB16STAND you can take your party to the next level with the 16" mountable mirror ball hook.  The mirror ball stand fits the MB-16 mirror ball and comes with its own built in motor that turns at 1 RPM.  The mirror ball hook  mounts on the T-SS28 Stands

Universal Dual ATA Style Speaker Flight Case Fits 2
of Most 15" Speakers

Measure the full height, width and depth of your speakers, if the measurements are LESS than 17" Wide x 16" Deep x 28" Tall they will fit in this case.   If in doubt of your measurements, you can usually obtain this information on the manufactuers website under "Specifications"

Ultrabright LED RGBWAUV PAR Projector 12 x 12W 6-in-1

X-PRIZMA 12RGBWAUV is a Ultrabright PAR36 fixture, engineered and designed in the USA for uplighting and stage effect.  This light fixture will bring color and excitement to any event.  With a diecast aluminum housing that allows for a super strong and durable light.