Products

Flip-Ready Easy Detachable with 2U under console Retracting Hydraulic Lift Case for Allen and Heath DLive S5000 Console by ZCase

FOR CUSTOM ORDER ONLY 

ProX XZF-AH-S5000 D Flip-Ready™  with Detachable Mechanism case for Allen and Heath DLive S5000 Console is Made in Poland exclusively for ProX by ZCase® These cases for digital audio consoles are designed and built to make transport and setup quick and very easy.  No more lifting heavy consoles into place on a table or stand. 

Universal Flight Case for Small to Medium Size DJ Controllers 20" W x 13" D and Sliding Laptop Shelf

The ProX XS-UXLT MK2 Universal Flight case is made specifically for SMALL to MEDIUM size Digital DJ Controllers.  The case comes with plenty of foam inserts to get that completely customized snug fit to protect your favorite DJ controller!  This XS-UXLT Flight case is made with the highest quality material and workmanship to give you the ultimate security for any sized controller. If you have a passion for your gear and want to keep it safe at all times, this case will perform at the highest level every time.

Flight Case for Rane Seventy-Two 72 and Rane Seventy DJ Mixer

ProX XS-RANE72 Road Case is designed by ProX Cases for the Rane Seventy-Two (72) and Rane Seventy (70) which is made with the highest quality material and workmanship to give you the ultimate security for your equipment. If you have a passion for your gear and want to keep it safe at all times, this case will always perform at the highest level.  The XS-RANE72 is constructed with our rugged signature 3/8" Gig-Ready Series Plywood, reinforced steel ball corners, and recessed steel padded handles and latches. There is additional space for cables and small accessories in the back and underneath the unit for convenience, as well as a removable front panel for you to easily access the front controls and headphone/mic jacks.

Side Entry Clamp W/Reversed Elbow & Half Coupler For 2" (50mm) Tube Trussing

ProX T-C15 Side Entry Clamp W/Reversed Elbow & Half Coupler For 2" (50mm) Tube Trussing This TUV approved accessory clamp with a half coupler from ProX Direct is designed to be used with 50mm (2") tubing.  Compatible with F31-F32-F33-F34-F44P Trussing. 

Top Truss Section for Electric Motor or Manual Chain Hoist

The ProX XT-TOPCM Top Section fits F34 Series 12" and is designed for Electric Motor or Manual Chain Hoist up to 4 tons.

Aluminum Truss Shelf W-2 Clamps 14" D x 16.14" W Max Load 220lbs

The ProX XT-SHELF Aluminum Truss Shelf W-2 Clamps is the best truss shelf on the market today. The XT-SHELF is made from heavy-duty aircraft aluminum and constructed to the highest safety ratings by certified welders. It comes with two pro slim clamps and is designed to hold up to 220 lbs.

Heavy Duty 2 Leg Clamp for StageQ Staging

The ProX XSQ-MX2 StageQ Heavy Duty STAGE 2 LEG CLAMP  This is the clamp for the StageQ Heavy Duty Platform Series Stage. Built with industry-leading materials and precision production processes. The clamps are made of high-quality steel.   Us of these clamps where only 2 legs meet increases the stability of the staging system.  

StageQ™ Panel to Panel Stage Bottom Clamp

ProX XSQ-C11 MK2 StageQ™ Panel to panel stage bottom Clamp is used for securing ProX StageQ stage panels (2'x8', 4x4' and 4x8') . Two panel to panel stage bottom clamps are used on every 4'ft and 8'ft side where panels join. This heavy duty clamp has a big twist knob that makes it easier to tighten with your hands and fits the pattern of a truss tool socket.

Professional Waterproof SAC3MPX Power Twist TR1 Connector MALE Socket BY SEETRONIC

ProX XC-SAC3MPX Professional Waterproof SAC3MPX Power Twist TR1 Connector MALE Socket BY SEETRONIC. Socket achieves IP65 protection when used in combination with matching counterpart. Includes Matching Seal with Protective Cap.

Cat 5/6 RJ45 to 3 Pin Male DMX Connector/Adapter

This ProX XC-RJ45XM3 is a RJ45 to 3PIN Male DMX connector.  The XLR to RJ45 adapter makes it possible to use any length and low cost CAT-5/6 ethernet cable as a DMX512 cable.  The electrical properties of CAT-5/6 wiring is essentially the same as the more expensive DMX512 cables.   XLR to RJ45 are adapters to convert a DMX512 XLR connector to a RJ45 connector for using Cat 5/6 cables as DMX.   NOT FOR AUDIO!

Padded Gig Bag Fits 2 16x16 Truss Base Plates

The ProX XB-BP16TB is a durable and strong carry bag for two (2) 16" baseplates.  The front zippered pouch is designed for small parts and accessories.   The bag is made from ballistic nylon and is double sewn for strength and durability and the handle makes for easy carrying.

ZeroG EVA Ultra-Lightweight Small Bag Molded Hard-Shell Case for DDJ-SB3 / RB / RR / SR2 and Similar Sized DJ Controllers

The ProX XB-DJCM ZeroG™ is specifically made for Pioneer® DDJ-SB3 / RB / RR / SR2 and Similar Sized Medium Sized Controllers.   This ProX  Ultra Lightweight Hard-Shell Bag with reinforced molded EVA exterior, lined with a high density foam padded interior and a tough zipper is the perfect compliment to your gear when you want a strong, good looking ultra-lightweight case for your equipment.  The ZeroG™ series is a great product falling between a traditional hard ATA style case and a soft padded bag.  

50lb Capacity Black Double Zipper Saddlebag Sandbag - Empty

The ProX XB-SANDBAG50 50lb Capacity Double Zipper Saddlebag Sandbag - Empty sandbags are for live entertainment, studio, grips, signs, displays, and other applications requiring weights.  These bags are fabricated using durable black Cordura type nylon fabric and heavy-duty zippers.  Constructed with two halves and a strong webbing handle on the top that continues around the entire bag for strength.  

Lighting System Triangle Truss with Crank Up System 5ft 10ft 15ft Wide

The ProX T-LS35C is a triangle crank truss system. This medium-duty truss lighting stand package includes two high-quality crank up stands & three 5FT triangle truss sections that create a near 5ft, 10ft or 15ft span. The stand can safely reach 9-10Ft. A pair of T-Adapters are included so you may easily mount your truss to the stands. You can mount up to 200 lbs evenly. Truss tubes are 35mm - 1 3/8" in diameter. Truss sections are 6 inches in overall width and 57" long.

Transformer Series DJ Folding Workstation Table - Fold Away W-Wheels | Black on Black

The ProX Transformer Series XS-DJSTNBL fold away DJ performance Desk is exactly what you need for your DJ or Studio Setup. If you are looking for a mobile DJ Workstation that's is easy to transport and will make your setup look amazing, this is for you. It's easily assembled, quick to collapse and folds flat for amazing portability.

Mirror Ball/Stands Package 2 X-MB16STAND & 2 MB-16 & T-SS28P

The ProX MB-16 is the ultimate start for your party! The 16 inch Mirror Ball is the perfect way to get your crowd moving, with its classic effects that work well with any lighting rig.  Our MB-16 mirror ball is made of 0.44" glass mirror tiles, which are smaller than those commonly used today. As a result, they offer an increased number of reflective tiles for a more dazzling and colorful effect.  You can achieve the classic disco effect through the use of a follow spot (sold separately). The ProX X-MB16STAND you can take your party to the next level with the 16" mountable mirror ball hook.  The mirror ball stand fits the MB-16 mirror ball and comes with its own built in motor that turns at 1 RPM.  The mirror ball hook  mounts on the T-SS28 Stands

24" RGB LED Strip Kit W/Remote Control & Power Supply

This flexible RGB LED strip is perfect for cabinet lighting, under-cabinet lighting, cove lighting, task lighting, bookshelf lighting, Nightclub and Bar lighting, and any other applications where there are restrictions in space. The IR Control box and remote enables quick and easy installation without the need for a DMX controller. 

BLACK JACK 5 mW Class 3A Red & Green Dual Color Animation Laser Effect Light

5 mW Class 3R Professional RED & GREEN
Dual Color Animation Laser Effect Light
Includes IR Remote Control.